Reduce poly count on certain part

GTA:V Modding with ZModeler3 discussion.
Post Reply
terryreynolds
Posts: 1
Joined: Sun Sep 26, 2021 5:46 pm

Reduce poly count on certain part

Post by terryreynolds »

A Complete Guide In Maintaining Your Favorite Ryobi 1600 Power Washers

So you are here because you are having a Ryobi 1600 pressure washer on hand. We all agree that this power washer is a great investment for our garden and motorhome. However, even though you are possessing the greatest psi electric pressure washer in the world, you still need to pay proper attention and care to keep it with you for years. Also, this 1.2 gpm washer costs a fortune and we bet that you do not want to pay such a large amount of money for another one after just 2 – 3 years of use. Therefore, we are going to show you some helpful tips to maintain your favorite machine:

1. Pump Protector Product

It does not matter which pressure washer you are having, 1600 psi pressure washer, and any other one needs a Pump Protector Product to extend its life cycle. Leaving water in the pump results in corrosion that damages the pump seals and pistons, which costs over $200 to replace. Therefore, it is worth spending a couple of minutes to flush the pump after every use.

Image

2. Prepare the Engine for Storage

The life of the engine can be extended by using some simple prestorage tips, including:

- Always refill with fresh oil after every time of using;

- Then run the engine for a couple of minutes to make sure all the internal parts are covered with clean oil.

The two steps and the experiences in Ryobi 1600 psi pressure washer will keep your machine in good condition during storage and also guarantee that you will have a great Ryobi electric pressure washer 1600 to go for the next time.

3. Use a Hose Extension

A 50-ft. extension hose will help to place the pressure washer in one spot, meaning you do not need to lug the washer upstairs to wash your deck. Extension hoses also provide convenience by reducing pressure and volume drop but at the same time giving you enough power to clean most surfaces.

Image

4. Use Soap Dispensers Designed for Pressure Washers

Never use such kinds of heavy-duty cleaning liquids or general purpose dispensers as it can destroy the machine’s pump. Besides, lots of people think that vehicle wash soap works for pressure washers but it is not right. Soap is not interchangeable, so find the one designed for pressure washers, not any other things. For the soaps to work efficiently, let the soap sit for an amount of time (usually 10 minutes but better as recommended by the manual) then scrub with a brush. After scrubbing all the soiled surfaces, rinse thoroughly to make sure no soap is left in the machine.

Ryobi 1600 psi electric pressure washer combines portability with convenience for users and is considered one of the best pressure washers on the market right now. Thumb up for your purchase decision on this nice machine; however, do not forget to take care of it so that the machine can always be a great assistant for you. Do not hesitate to let us know your thoughts and opinions. Also, if there are any other tips in your mind, share it with us in the comment section.
Last edited by terryreynolds on Tue Mar 26, 2024 8:36 pm, edited 4 times in total.
JayPD12
Posts: 85
Joined: Tue Apr 30, 2019 9:06 am

Re: Reduce poly count on certain part

Post by JayPD12 »

Hey there. This can be done with the optimize tool.

Tool found here:
https://gyazo.com/d45684a39fe76105ef00a2156e3f784e



HOW TO USE IT:

For reference:
This is original interior: (27,838 polys)
https://gyazo.com/cda649321ce822efd190f9836afe85b4

After setting the quality to 1 (as a test): (9,340 polys)
https://gyazo.com/211fa1a0151030b42bcf647a4d82aa10


Once you have the part you want to poly crunch (reduce polys) selected, click anywhere in the window and a popup like this will show up:
https://gyazo.com/0eb9f1cdbceb2a848257aeabb8ddde5f

Set the quality to lower, the lower it is, the worse the object will look and the lower polys it will be, and hit ok.

It will optimize and look like this in the messaging bar:
https://gyazo.com/9cb13018517778d9b87fa329be6cedd0

(My explanation might not be 100% properly worded as I'm not a zmod wiz but this is basic use of optimization).
Post Reply