ZModeler forum

Hi Oleg,
I don't know what is wrong.
Am I doing something wrong or is something wrong with Zmod.

For example: The Trailer Rearbumper with Lights works after export with this change in DETAIL2 " Map: Detail 2 change to Detail ",
but not for the Truck Rearbumpers with lights.

thanks in advance

Import


Export


in Game Only the pmd/pmg is packed as a mod

You have not the correct UV Channel in your 3D Modell and mat.

you should check whether UV#2 is actually matching layout for mask texture. If it doesn't, then mask texture uses layout of UV#1, but shader natively tries to use UV#2. In such a case, you can copy UV#1 onto UV#2 with Surface\Mapping\Copy UV tool.

Hi, Oleg and hi Herald,

Can I ask for assistance on ATS box trailer rear body. I have a problem with Miss-aligned texture after editing the SCS original model.



Settings of the material. If I set DETAIL2 to UV#3 the texture gets transposed but its not OK.



What could I do to fix the problem? Thank you.

Hello,

you have to enter the empty.dds there.

This is normally under

/vehicle/truck/upgrade

where you can find it.

also, once you set "empty.dds" on DETAIL2 texture slot, it is likely you will need to set "Use UV Mapping:" to "Manual UV#2" (currently UV#1 is set there). If this does not fix all paint jobs, set there "Manual UV#3" and export again.

Oleg, it must be set to UV3.

Otherwise it will not work for metallic coatings.

UV#3 works! Thank you so much, to both of you! Could have not done it by myself.