Search found 47 matches

by fabbromix
Thu Feb 24, 2022 10:07 am
Forum: ATS and ETS2 by SCS Software
Topic: Trailer Dummy Hook
Replies: 6
Views: 2009

Re: Trailer Dummy Hook

Harald-RS wrote: Wed Feb 23, 2022 6:37 am Do you have the experienced saddling up active?
Yes, I can go up.
The problem was the fifth wheel collision I canceled it and now I can engage.
by fabbromix
Sun Feb 20, 2022 6:42 am
Forum: ATS and ETS2 by SCS Software
Topic: Trailer Dummy Hook
Replies: 6
Views: 2009

Re: Trailer Dummy Hook

You showed a picture of the semitrailer with the MAN earlier where the semitrailer was higher up than the fifth wheel. The problem here is that you would not have had to change the semi-trailer, but only the hook point of the truck so that it goes further down so that the semi-trailer rests correct...
by fabbromix
Sun Feb 20, 2022 4:07 am
Forum: ATS and ETS2 by SCS Software
Topic: Trailer Dummy Hook
Replies: 6
Views: 2009

Re: Trailer Dummy Hook

Harald-RS wrote: Sun Feb 20, 2022 1:30 am The fault is not with the trailers but with the truck mod, where the hook point is too high.
Thanks Friend from mod the Hook I find it under the fifth wheel.
Maybe I have to raise it?

Image

Image

Image
by fabbromix
Sun Feb 20, 2022 12:48 am
Forum: ATS and ETS2 by SCS Software
Topic: Trailer Dummy Hook
Replies: 6
Views: 2009

Trailer Dummy Hook

Hello Community, I found an old trailer and fortunately my ETS2 (1.43) hooks the mod, but I have a problem hooking the trailer to the truck with the T key if I hook it from the garage everything ok, in my opinion the trailer is too low compared to the truck ( see photos). I entered Zmod I selected e...
by fabbromix
Wed Jan 12, 2022 9:33 am
Forum: ATS and ETS2 by SCS Software
Topic: After Modification the Materials are not loaded automatically.
Replies: 4
Views: 1838

Re: After Modification the Materials are not loaded automatically.

Check the sticky "Paths and folders guide" topic. I feel like you've messed folders setup on some step and got a misconfigured PMD files. The "base scs" and "mod folder" should not be the same. Oleg, you are absolutely right I had to load the materials from both the DA...
by fabbromix
Sat Jan 08, 2022 12:18 pm
Forum: ATS and ETS2 by SCS Software
Topic: After Modification the Materials are not loaded automatically.
Replies: 4
Views: 1838

Re: After Modification the Materials are not loaded automatically.

Did you also specify the DAF DLC as base or mod folder when importing. Otherwise the Z-Mod can not find the materials. Thanks for the reply. I load everything from the same source folder (I was used to this in the past). This Addons as you well know I hook it to the original DAF 2021 Mod. https://i...
by fabbromix
Sat Jan 08, 2022 11:02 am
Forum: ATS and ETS2 by SCS Software
Topic: After Modification the Materials are not loaded automatically.
Replies: 4
Views: 1838

After Modification the Materials are not loaded automatically.

Dear Users, I wanted to make some changes on a mod downloaded from the web on Addons DAF-XG-XG + 2021 (Thanks SCS-Blade-1974) because the Dummy (Photo-1) got stuck on the rear exhaust, so I decide to make a change to the Trlr_cables (Photo-2) moving it above. Once everything is loaded I realize that...
by fabbromix
Thu Jan 06, 2022 7:46 am
Forum: ATS and ETS2 by SCS Software
Topic: Visual problem mod
Replies: 3
Views: 1429

Re: Visual problem mod

Harald-RS wrote: Thu Jan 06, 2022 6:39 am Wrong UV Chanel by export
Would you kindly give me the steps to take.
by fabbromix
Thu Jan 06, 2022 6:23 am
Forum: ATS and ETS2 by SCS Software
Topic: Visual problem mod
Replies: 3
Views: 1429

Visual problem mod

Dear Community, after making some mini changes in this mod after reloading the whole I have a problem in displaying the side bellies with a finish in my opinion (glossy chrome). Could you help me understand what happened? (the only flaw in the whole mod). ------------------------------ Mod Original:...
by fabbromix
Tue Nov 02, 2021 7:25 pm
Forum: ATS and ETS2 by SCS Software
Topic: Glass Problem
Replies: 8
Views: 3644

Re: Glass Problem

SpeedyJoe wrote: Sun Oct 31, 2021 11:20 pm Try this

Perfect, it worked well. Thanks.
by fabbromix
Sun Oct 24, 2021 7:47 am
Forum: ATS and ETS2 by SCS Software
Topic: Glass Problem
Replies: 8
Views: 3644

Re: Glass Problem

I did as you advised, I inserted the glass of the truck in the CAT mod and I can see well. • 2nd - test I assigned the same material to the glass of the truck to the mod but nothing changes very high light. I checked the settings of the 2 glasses are identical but that of the CAT mod is always displ...
by fabbromix
Fri Oct 22, 2021 9:01 am
Forum: ATS and ETS2 by SCS Software
Topic: Glass Problem
Replies: 8
Views: 3644

Re: Glass Problem

Oleg wrote: Wed Oct 13, 2021 10:05 am then the problem is in geometry itself. paint per-vertices color to grey color and per-vertices alpha to black.
Unfortunately I don't understand what I should change, if possible would you give me screenshots of what I should change so I can understand the changes?

Thank.
by fabbromix
Sun Oct 10, 2021 4:44 am
Forum: ATS and ETS2 by SCS Software
Topic: Glass Problem
Replies: 8
Views: 3644

Re: Glass Problem

copy material settings and material textures from original game models for your glass material. the glass shader might have some specific logic to texture channels and/or vertex color channels. Thanks for the advice, unfortunately even changing the MAT file with the one from Game I have the same pr...
by fabbromix
Sun Sep 26, 2021 4:25 am
Forum: ATS and ETS2 by SCS Software
Topic: Glass Problem
Replies: 8
Views: 3644

Glass Problem

I wonder if you could tell me how to darken the brightness of the glass where I no longer know what to change.

Image

Image

My setting Glass Zmod.

Image

Image
by fabbromix
Fri Aug 27, 2021 8:56 am
Forum: ATS and ETS2 by SCS Software
Topic: DDS Problem
Replies: 2
Views: 1493

Re: DDS Problem

Thanks Reinhard, I'll try to decrypt the Log.
by fabbromix
Sun Aug 22, 2021 9:52 am
Forum: ATS and ETS2 by SCS Software
Topic: DDS Problem
Replies: 2
Views: 1493

DDS Problem

Hello Community, I made some changes to an original mod from FS-19 (Tractor-CAT) to load it on a trailer for ETS2, as long as I see it in Zmod everything is ok, the new materials I added I visualize them well but how am I going to insert it in game everything I created is displayed all "Purple&...
by fabbromix
Tue Aug 10, 2021 9:01 am
Forum: ATS and ETS2 by SCS Software
Topic: Select XYZ in Scale.
Replies: 2
Views: 1966

Re: Select XYZ in Scale.

Thank You!!!
by fabbromix
Mon Aug 09, 2021 10:35 am
Forum: ATS and ETS2 by SCS Software
Topic: Select XYZ in Scale.
Replies: 2
Views: 1966

Select XYZ in Scale.

Hi Community, I need to know if it is possible to select all 3 " XYZ " axes at the same time in the Scale section in order to scale a 3D object without any deformation. I tried to scale the 2 "XY" axes first (what I know how to do in Zmod) but the "Z" side, remaining as...
by fabbromix
Sat Jun 05, 2021 11:20 am
Forum: ATS and ETS2 by SCS Software
Topic: Move Objects Keyboard
Replies: 1
Views: 1289

Move Objects Keyboard

Hello Community,
I should move some objects towards DX / SX / Top / Bottom very precisely and using the mouse I can't center the movement of the object well.
Is it possible to use the keys on the keyboard so that I can move the selection more precisely?
by fabbromix
Thu May 06, 2021 10:23 pm
Forum: ATS and ETS2 by SCS Software
Topic: Mod without sound
Replies: 0
Views: 2027

Mod without sound

Dear Community, I modified an existing mod but in reassembling everything I no longer have external cabin audio (horn, horns, air brakes, reverse gear, etc) could you tell me the steps to take to be able to reactivate audio in the various folders?
Thank you.
by fabbromix
Wed May 05, 2021 4:15 am
Forum: ATS and ETS2 by SCS Software
Topic: Directional arrows problem
Replies: 2
Views: 2086

Re: Directional arrows problem

Have you checked the associated mat file? There have been a plenty of changes in ETS2 on lights and respective shaders in update 1.40 Thanks Oleg for the reply. Problem solved I had to reinsert the complete Flare. In my case the path is: model --> flare --> textures --> here I will insert the files...
by fabbromix
Tue May 04, 2021 9:32 am
Forum: ATS and ETS2 by SCS Software
Topic: Directional arrows problem
Replies: 2
Views: 2086

Directional arrows problem

I wonder if some of you can help me in adjusting the blue arrow lights (after I have made some changes to the mod) to the classic orange color.
I put screenshots.

Image
by fabbromix
Wed Apr 21, 2021 2:33 am
Forum: ATS and ETS2 by SCS Software
Topic: Problem Wheels 6x4
Replies: 0
Views: 1913

Problem Wheels 6x4

Greetings to the whole community, I would need some help being new to modeling and zmod software like being able to insert the wheels in the 2nd axle in a mod modified by me in building a 6x4 frame. I'll explain better, I copied the wording of the Wheel_r_0_0-Wheel_r_1_0 axes Dummy -> this works wel...
by fabbromix
Sun Jun 07, 2020 11:02 am
Forum: ATS and ETS2 by SCS Software
Topic: New Material in Zmod
Replies: 10
Views: 4732

Re: New Material in Zmod

Oleg wrote:the old/correct uV mapping is lost. There is no way to restore it unless you have some backup file or an exported model to restore the object.
Exactly Oleg, I had not taken into consideration that having the original mod I could export the model and then reload it in my mod.
by fabbromix
Sun Jun 07, 2020 12:31 am
Forum: ATS and ETS2 by SCS Software
Topic: New Material in Zmod
Replies: 10
Views: 4732

Re: New Material in Zmod

may you specify step by step how this has happen? Is UV mapping got screwed or wrong texture got applied? After mistakenly assigning General New to the 4x2 chassis, I find myself hundreds of pieces to be moved by hand in the assigned DDS (even if the DDS has not been changed and the original one ha...