Compatibility Zm 3 to Zm2 Issue

GTA:V Modding with ZModeler3 discussion.
Post Reply
Gabrielbarbosa
Posts: 30
Joined: Sat Apr 20, 2019 7:49 pm
Contact:

Compatibility Zm 3 to Zm2 Issue

Post by Gabrielbarbosa »

Hello guys, I am having a small compatibility problem between the versions of Zmodeler 3 and 2.
I open any Z3D version 2.xx project in zmodeler 3, when I "Saved as" Zmodeler 2.x compatible, ok.
Now when I open the compatible Z3D in Zmodeler 2.x, this problem happens, my 3D is not visible on the 3D screen, it is all in wire frame. why does this happen?
what can i do to fix this error? :?

The following warnings appear in the messaging bar.

ZModeler is ready.
Missing serializeable for services::CAnimationService
Missing serializeable for core::CDefaultCompatibilityInfo
Missing interface for ID 13E
Missing interface for ID 137


pic.
User avatar
Oleg
Site Admin
Posts: 14045
Joined: Fri Feb 06, 2004 3:54 am
Contact:

Re: Compatibility Zm 3 to Zm2 Issue

Post by Oleg »

send me your .z3d file, I'll take a look.
Some "missing interface" is a correct scenario, it should not be a problem at all.
Gabrielbarbosa
Posts: 30
Joined: Sat Apr 20, 2019 7:49 pm
Contact:

Re: Compatibility Zm 3 to Zm2 Issue

Post by Gabrielbarbosa »

Oleg wrote: Fri May 14, 2021 3:11 am send me your .z3d file, I'll take a look.
Some "missing interface" is a correct scenario, it should not be a problem at all.
link below.
https://www.mediafire.com/file/vutbjyrb ... 3.rar/file
User avatar
Oleg
Site Admin
Posts: 14045
Joined: Fri Feb 06, 2004 3:54 am
Contact:

Re: Compatibility Zm 3 to Zm2 Issue

Post by Oleg »

Something is wrong with your zmodeler2 settings. the file opens fine in ZModeler2 after saving as "zmodeler2 compatible".
zmodeler3_to_zmodeler2.jpg
Gabrielbarbosa
Posts: 30
Joined: Sat Apr 20, 2019 7:49 pm
Contact:

Re: Compatibility Zm 3 to Zm2 Issue

Post by Gabrielbarbosa »

Oleg wrote: Sat May 15, 2021 2:50 am Something is wrong with your zmodeler2 settings. the file opens fine in ZModeler2 after saving as "zmodeler2 compatible".
zmodeler3_to_zmodeler2.jpg
So what can this be wrong?
I don't remember changing settings
User avatar
Oleg
Site Admin
Posts: 14045
Joined: Fri Feb 06, 2004 3:54 am
Contact:

Re: Compatibility Zm 3 to Zm2 Issue

Post by Oleg »

There is nothing I could suggest on this particular issue. The problem could be in just one object, or in entire scene. As a quick advise, consider saving several .z3d files, put just a couple of objects in each .z3d file. You can File\Merge them together later.
Post Reply