Zmod version downgrade
Moderator: Oleg
-
- Posts: 3
- Joined: Fri May 10, 2019 1:33 am
Zmod version downgrade
Hey, i wanted to ask if its possible to "downgrade" the zmod version, so i have the pmg format for 1.34 again?
1.35 doesnt work properly for me (i mean thats fine, its a beta) but i have to finish some stuff for 1.34 so yea it would be great if its possible to "downgrade"
Kind regards,
Tristan
1.35 doesnt work properly for me (i mean thats fine, its a beta) but i have to finish some stuff for 1.34 so yea it would be great if its possible to "downgrade"
Kind regards,
Tristan
-
- Posts: 3
- Joined: Fri May 10, 2019 1:33 am
Re: Zmod version downgrade
Oh, and with 1.34 and 1.35 i mean ETS2 of course
Re: Zmod version downgrade
here's a 1.34
Mind, you can have only one file/version installed in ZModeler at a time.
Mind, you can have only one file/version installed in ZModeler at a time.
- Attachments
-
- SCS Soft Prism3D_134.zip
- 64-bit version
- (168.55 KiB) Downloaded 432 times
-
- SCS Soft Prism3D_134_32bit.zip
- 32-bit version
- (155.88 KiB) Downloaded 284 times
Re: Zmod version downgrade
Hey, is the 1.34 version, version 3.2.0 (build 1182) ?
Re: Zmod version downgrade
yes, it is for 3.2.0 only (64 bit version).
-
- Posts: 6
- Joined: Mon May 27, 2019 9:24 pm
Re: Zmod version downgrade
Hi Oleg! Can you please give for 32-bit too? I'm working on mods on my laptop that uses 32- bit Win10 and playing on other PC. My Zmod copy is not seeing 64-bit SCS Soft Prism 3D.zmf.
Re: Zmod version downgrade
edited the post above with 32-bit version for download.
-
- Posts: 6
- Joined: Mon May 27, 2019 9:24 pm
Re: Zmod version downgrade
Thanks! It's working now for me too!
-
- Posts: 1
- Joined: Fri Jun 28, 2019 8:14 pm
Re: Zmod version downgrade
hey
I just patched my game back from 1.35 to 1.34.
now i wanted to do the same with the zmodeler3 with the scszmf file only zmodeler always tells me that it's up to date that means it's patched for the game version 1.35 or?
he following errors are in the game log
00:00:30.595 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/materials/grill.mat' in the read_only mode.
00:00:30.595 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/materials/grill.mat'
00:00:30.596 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/materials/cadre.mat' in the read_only mode.
00:00:30.596 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/materials/cadre.mat'
00:00:30.596 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/materials/rubber.mat' in the read_only mode.
00:00:30.596 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/materials/rubber.mat'
00:00:30.596 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/materials/supportlp.mat' in the read_only mode.
00:00:30.596 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/materials/supportlp.mat'
00:00:30.596 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/materials/licenseplate.mat' in the read_only mode.
00:00:30.596 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/materials/licenseplate.mat'
00:00:30.596 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/default_material.mat' in the read_only mode.
00:00:30.596 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/default_material.mat'
all paths are correct
I just patched my game back from 1.35 to 1.34.
now i wanted to do the same with the zmodeler3 with the scszmf file only zmodeler always tells me that it's up to date that means it's patched for the game version 1.35 or?
he following errors are in the game log
00:00:30.595 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/materials/grill.mat' in the read_only mode.
00:00:30.595 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/materials/grill.mat'
00:00:30.596 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/materials/cadre.mat' in the read_only mode.
00:00:30.596 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/materials/cadre.mat'
00:00:30.596 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/materials/rubber.mat' in the read_only mode.
00:00:30.596 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/materials/rubber.mat'
00:00:30.596 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/materials/supportlp.mat' in the read_only mode.
00:00:30.596 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/materials/supportlp.mat'
00:00:30.596 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/materials/licenseplate.mat' in the read_only mode.
00:00:30.596 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/materials/licenseplate.mat'
00:00:30.596 : <ERROR> [fs] Failed to open file '/vehicle/truck/upgrade/trux/default_material.mat' in the read_only mode.
00:00:30.596 : <ERROR> [material] Can not open '/vehicle/truck/upgrade/trux/default_material.mat'
all paths are correct
Re: Zmod version downgrade
Hello,
I have a question. Where should I put the file to do the downgrade?
I have a question. Where should I put the file to do the downgrade?
Re: Zmod version downgrade
into Filters folder with replace of existing file.