GTA4 WFT Export discussion
Moderator: Oleg
Re: GTA4 WFT Export discussion
Thanks, I've restored this topic.
Re: GTA4 WFT Export discussion
Is there a file in GTA 4 that contains an information what can and what cannot be in the wtf hierarchy? I mean like a list of node names. For example headlight_r does exist but head_light_r doesn't (I mean in a way that it would function properly). Is there a way to know what exactly works and what not? (I'm not talking about shaders)
Re: GTA4 WFT Export discussion
проблемма при экспорте - нажимаю на экспорт показывает что грузится и не отвичает. что это может быть?
Re: GTA4 WFT Export discussion
Why everything is missing?
I needed the 'GTA4 Collision' topic.
I needed the 'GTA4 Collision' topic.
Re: GTA4 WFT Export discussion
Sorry, I've pruned it by mistake.
Edit: I've restored "GTA4: Collision" and "GTA: Scene assembly" topics.
Edit: I've restored "GTA4: Collision" and "GTA: Scene assembly" topics.
Re: GTA4 WFT Export discussion
Hey everyone.I need help!
So,i decided to convert a car from FM4 autovista,and it was fine ,until the cars size became more than 9.3~9.5 Mb,now i get RC20,but if I remove some details,and the size goes down to 9.2mb,its fine!
I was like,ok its way too big for zmodeler,but couple of days later I saw Mercedes SLR,on our site,and it was 10.9Mb.
So is there a FIX for it?I am working with zmodeler 2.2.2 build 964/962 ,i haven't tried to export it with 2.2.6,with new filters.
If it is possible to FIX it,please tell me how.
THANKS!
So,i decided to convert a car from FM4 autovista,and it was fine ,until the cars size became more than 9.3~9.5 Mb,now i get RC20,but if I remove some details,and the size goes down to 9.2mb,its fine!
I was like,ok its way too big for zmodeler,but couple of days later I saw Mercedes SLR,on our site,and it was 10.9Mb.
So is there a FIX for it?I am working with zmodeler 2.2.2 build 964/962 ,i haven't tried to export it with 2.2.6,with new filters.
If it is possible to FIX it,please tell me how.
THANKS!
Re: GTA4 WFT Export discussion
The file size is not the over-detalization indication you should use in a first place. I suspect the target file could be even 50Mb and contain a working model. The problem is generally in a geometry layout inside the file. If there are smaller pieces of mesh, the game will give less rc20; once these pieces get bigger you can get rc20 instantly. For example, you can have 1000 materials and have only 100 polygons per single material - your overal model will contain 1000 small geometry pieces and be 100k polygons at all, but it will work with no rc20.
the latest version of filter is preferable to export high-detaIled models, since it uses different mesh-partitioning techniques.
the latest version of filter is preferable to export high-detaIled models, since it uses different mesh-partitioning techniques.
Re: GTA4 WFT Export discussion
I have imported my first car model into Z, assigned materials, textures, labelled everything, created heirachy, collision objects. All this worked fine.
I can export my car to a WFT file without any error messages.
I can import the WFT into Z and dont see any problems.
I can import the WFT and WTD file into the GTA vehicles img file and view my car in OpenIV. Everything looks as it should.
My problem is when I try to spawn the car within GTAIV, the game crashes and I am not sure what is causing this to happen
Can you kindly offer some suggestions as to what could be causing the crash?
Thanks
I can export my car to a WFT file without any error messages.
I can import the WFT into Z and dont see any problems.
I can import the WFT and WTD file into the GTA vehicles img file and view my car in OpenIV. Everything looks as it should.
My problem is when I try to spawn the car within GTAIV, the game crashes and I am not sure what is causing this to happen
Can you kindly offer some suggestions as to what could be causing the crash?
Thanks
Re: GTA4 WFT Export discussion
I found out what was causing the game to crash. It was the object axes pointing different directions.
My car can be driven in GTAIV, but I cant see the wheels for lr, rr, rf, which have dummy objects. I can only see wheelmesh_lf.
What am I doing wrong for the dummy wheels not appearing in the game?
Thanks
My car can be driven in GTAIV, but I cant see the wheels for lr, rr, rf, which have dummy objects. I can only see wheelmesh_lf.
What am I doing wrong for the dummy wheels not appearing in the game?
Thanks
Re: GTA4 WFT Export discussion
Is your wheelmesh object name specified in square braces? e.g "[wheelmesh_l0]".
Re: GTA4 WFT Export discussion
Yup, that was what I missed. Thanks!Oleg wrote:Is your wheelmesh object name specified in square braces? e.g "[wheelmesh_l0]".
Re: GTA4 WFT Export discussion
Sorry to bother again. My rims and tyres look fine in Z and when I preview in OpenIV, but in the game I can only see the tyres. The rims are invisible.
I mapped the tire material/texture to the tyre. A Chrome material to the edge of the rim and lock nuts. A different texture to the centre of the rim. Then attached all pieces together.
Is there something I'm missing in the process?
I mapped the tire material/texture to the tyre. A Chrome material to the edge of the rim and lock nuts. A different texture to the centre of the rim. Then attached all pieces together.
Is there something I'm missing in the process?
Re: GTA4 WFT Export discussion
yes, you're missing something
you're missing the brains it takes to simply open ANY original file and study the inherent shaders and mesh properties
you're also missing the common sense it would take to read any and all pinned topics in this sub-forum - hope this helps!
you're missing the brains it takes to simply open ANY original file and study the inherent shaders and mesh properties
you're also missing the common sense it would take to read any and all pinned topics in this sub-forum - hope this helps!
Re: GTA4 WFT Export discussion
The missing brains worked it out. So yeah, thanks for the kind words....Kotton wrote:yes, you're missing something
you're missing the brains it takes to simply open ANY original file and study the inherent shaders and mesh properties
you're also missing the common sense it would take to read any and all pinned topics in this sub-forum - hope this helps!
Re: GTA4 WFT Export discussion
AHHHH! again! rc20 on a car that exported normally for 2 months!rc20 is not caused by zmodeler,i changed my vcredist and it messed up everything.in 2011 i haven't got any errors like rc20 or just crashes.but my pc was full of crap,and i had to reinstall my windows,i reinstalled it,opened the same car (everything was fine before),exported,rc20.
I will try to figure out how i managed to stay away from rc20
I will share the necessary files,as soon as i figure out how to fix it!
+ i tried to export it with 222 962/964,224,225,226(with new filters),same result,rc20
Funny thing!
i spawned my RR ghost,it magically spawned O_o
then i restarted the game without touching anything,rc20.so rc20 is not caused by zmodeler,its something else!
I will try to figure out how i managed to stay away from rc20
I will share the necessary files,as soon as i figure out how to fix it!
+ i tried to export it with 222 962/964,224,225,226(with new filters),same result,rc20
Funny thing!
i spawned my RR ghost,it magically spawned O_o
then i restarted the game without touching anything,rc20.so rc20 is not caused by zmodeler,its something else!
Re: GTA4 WFT Export discussion
Anyone know why zmodeler crashes when i try to export wft? I'd like to see how much stuff i'm still lacking before my conversion project works ingame.
Using Zmodeler 2.2.4 build 981.
Using Zmodeler 2.2.4 build 981.
Re: GTA4 WFT Export discussion
Ok now i can export it but now it crashes when i try to spawn it. export problem was because of too high res textures i guess.jani201 wrote:Anyone know why zmodeler crashes when i try to export wft? I'd like to see how much stuff i'm still lacking before my conversion project works ingame.
Using Zmodeler 2.2.4 build 981.
Maby because of handling_sa/vehicles_sa.ide i cant spawn the car? Or any other reasons?
Re: GTA4 WFT Export discussion
i can export with only 1 material, but then it wont work ingame. if i use multiple materials zmodeler crashes so i can export only with too low amount of materials i need to check everything i can...jani201 wrote:Ok now i can export it but now it crashes when i try to spawn it.jani201 wrote:Anyone know why zmodeler crashes when i try to export wft? I'd like to see how much stuff i'm still lacking before my conversion project works ingame.
Using Zmodeler 2.2.4 build 981.
Maby because of handling_sa/vehicles_sa.ide i cant spawn the car? Or any other reasons?
Re: GTA4 WFT Export discussion
hi, i have a problem, car dancing after changing wheel,(just rim change)
(hub - suspention- and others did not change )
Here is a video of my issue 7 mb size
http://www.mediafire.com/?wl3lq71hmnwnnou
(hub - suspention- and others did not change )
Here is a video of my issue 7 mb size
http://www.mediafire.com/?wl3lq71hmnwnnou
Re: GTA4 WFT Export discussion
Hey there..
anyone still having the file from the first post? The link does not work sadly.
Thanks!
Threep
anyone still having the file from the first post? The link does not work sadly.
Thanks!
Threep
Re: GTA4 WFT Export discussion
^ +1 ..materials.xml is missing, please reup
Re: GTA4 WFT Export discussion
reuploaded.
Re: GTA4 WFT Export discussion
Здравствуй Олег такая проблема сконвертил авто, в игре всё хорошо было, но после того как добавляю какую либо деталь в игре выкидывает rc20 размер модели не большой 3,16 мб. Деталь буквально в 200 поли.
Как это решить?
Как это решить?